DRAWN ARC STUD WELDERS
TRU-WELD
TW6802 STUD WELDING SYSTEM
 |
The TW6802 is a fully integrated stud welding system for ferrule-shielded and gas-shielded drawn arc stud welding. The TW6802 contains two (2) digital controls for weld time and current. Stepless time and current control allow for infinite settings for fine-tuning the welding output. The system was designed to meet the most challenging stud welding jobs. |
INCLUDES: Power Supply, Two (2) TWE17000 Heavy Duty Stud Guns, Two (2) Sets of 50 feet 4/O Weld and Control Cable and Two (2) Sets of 25 feet 4/O Ground Cable.
WELD RANGE |
1/4” To 1” Diameter |
INPUT VOLTAGE |
230 VAC 3 Phase 60 Hz 460 VAC 3 Phase 60 Hz 575 VAC 3 Phase 60 Hz |
DUTY CYCLE |
Up to 5/8”: Unlimited Up to 3/4”: 18 to 24 Per Minute Up to 7/8”: 12 to 24 Per Minute Up to 1”: 6 to 8 Per Minute |
FUSING REQUIREMENT |
230 / 180 Amps 460 / 290 Amps 575 / 80 Amps |
DIMENSIONS |
29” H x 28” W x 36” L 695 Lbs |
PERFORMANCE |
Powerful Output for Even the Largest Diameter Jobs |
SAFETY |
Safety Welding Interlock Keeps System from Double Triggering and Saves on Chuck Wear |
COUNTER |
Resettable Stud Job Counter |
Privacy Policy Terms of Service
NELSON, PROWELD and NELSON STUD WELDING are registered trademarks of Nelson Stud Welding, Inc.