CD STUDS
FLANGED NO THREAD CDFNT
STUD SPECIFICATIONS
| D | FD | MIN L |
|---|---|---|
| 3/32 | .143 | .250 |
| .115 | .171 | .250 |
| 1/8 | .156 | .250 |
| .141 | .195 | .250 |
| 5/32 | .221 | .250 |
| .161 | .221 | .250 |
| 3/16 | .221 | .250 |
| .215 | .281 | .312 |
| 1/4 | .281 | .312 |
| .273 | .343 | .312 |
| 5/16 | .343 | .500 |
MATERIAL |
LOW CARBON STEEL | |
| C - 0.23% Max | P - 0.04% Max | |
| Mn - 0.90% Max | S - 0.05% Max | |
 MECHANICAL PROPERTIES |
Tensile: | 60,000 psi (min) |
| Yield: | 50,000 psi (min) | |
| Elongation: | 20% (in 2 inches) |
PLATING & ANNEALING |
Copper plating is standard. |
| Other plating is available. | |
| Studs are annealed where required. |
|
MATERIAL |
STAINLESS STEEL | |
| AISI Grade: 302/304/305 Standard | ||
| Other grades are available. | ||
MECHANICAL PROPERTIES |
Tensile: | 85,000 psi (min) |
| Yield: | 40,000 psi (min) |
|
PLATING & ANNEALING |
Studs are annealed where required. |
|
MATERIAL |
ALUMINUM | |
| Alloy: 1100 & 5000 Series | ||
| Other alloys are available. | ||
MECHANICAL PROPERTIES |
Tensile: | 42,000 psi (min) 5000 Series |
| Yield: | 30,000 psi (min) 5000 Series |
|
MATERIAL |
BRASS | |
| Alloy (Lead Free) 70-30 is standard. | ||
| Other alloys are available. | ||
MECHANICAL PROPERTIES |
Tensile: | 70,000 psi (min) |
| Yield: | 50,000 psi (min) |
Privacy Policy Terms of Service
NELSON, PROWELD and NELSON STUD WELDING are registered trademarks of Nelson Stud Welding, Inc.